General Specifications:
Sweeping Width (2 gutter brooms) ..................... 120 inches
Sweeping Width (1 gutter broom) ....................... 100 inches
Sweeping Width (sweeping head only) ................ 80 inches
Travel Width ............................................................ 96 inches
Height ...................................................................... 90 inches

Debris Hopper:
Volumetric Capacity ...................................... 4.3 cubic yards
Dumping ................................................................... Hydraulic
Material ..................................................... Heavy gauge steel
Dump Height ........................................................... 67" inches
Dumping Tilt Angle ............................................................. 88°
Inspection Doors ............................................ 1 on each side
Controls .......................................................... Electric; in-cab
Interior Coating .............................................. Durable coating
Exterior Coating .................................... Zinc primer/urethane

Blower System:
Type .......................................... WhisperWheel SM centrifugal
Drive .............................................. Banded 3V, 5 groove belt
Speed ..................................................................... 2600 RPM
Diameter ............................................................................. 30"
Construction ....................... Welded abrasion-resistant steel
Housing Liner ....................................... Bolt-in corded rubber
Mounting .................................................... 2 sealed bearings
Vacuum Enhancer ............................ For heavy/light material

Sweeping Head:
Type ........................ Dual chambered, full-width blast orifice
Operating Direction .............................. Forward and reverse
Suspension ................................. Adjustable spring balanced
Length ............................................................. 80" (2032 mm)
Blast Hose Diameter ......................................... 12" (305 mm)
Suction Hose Diameter ..................................... 12" (305 mm)
Hose Construction ........................ Reinforced molded rubber
Head Area ...................................................... 2080" (13,419)
Controls ........................................ Hydraulic raise and lower
Skids ........................................Double row tungsten carbide

Electrical System:
Starter .......................................................................... 12 volt
Alternator ....................................................... 12 volt, 65 amp
Battery ........................................ 2 @ 12 volt, 750 CCA each
Controls ....................................................................... Back lit
Circuit Breakers on Sweeper ..................... Re-settable type

Water System:
Tank Capacity ...................................................... 130 gallons
Construction ...................................................... polyethylene
Pump ..................................... Hydraulic powered centrifugal
Controls .......................................................... Electric; in-cab
Filter ............................................................ fine mesh screen
Mounting ................................................................ removable
Low-Water Warning .......................................... indicator light
Fill Diameter ..............................................2.5" (63.5 mm) NST

Gutter Broom(s):
Type ........................................................ Vertical steel digger
Segments ............................................................ 4 each side,
disposable, tempered steel wire filled
Diameter ......................................................... 39" (990.6 mm)
Drive ................................................... Hydraulic torque motor
Speed ........................................................................ Variable
GEOSM (Gutter Broom Extension Override) ............ Optional
Mounting .................................................... trailing arm design
Location ................................................................ behind cab
Suspension ......................................................... free floating
Wear Adjustment ..................................................... automatic
Impact Protection .......................................................... spring
Tilt Angle Adjustment .................. manual or remote (optional)

Hydraulic System:
Pump Type ....................................... fixed displacement gear
Reservoir ................................................................ 16 gallons
Drive ..................................................................... Direct drive
Filter ........................................................... 10 micron spin-on
Strainer ..................................................................... 80 mesh

Paint:
One coat of sealer primer and 2 coats of DuPont Imron 5000®
polyurethane in standard white color.

Chassis:
A selected truck chassis is provided to give adequate ratings
of all components compatible with hopper capacity. Consult
factory for detailed requirements.

Optional Equipment:
Dual steering, cab-mounted barlight beacon, arrow board,
washdown system, special lighting, ether cold starting aid, engine
block heater, load weight indicator, automatic lube system, and
others. Consult the factory for a listing of all currently available
options.