General Specifications:
Sweeping Width (2 gutter brooms) ............ 144" (3,658 mm)
Sweeping Width (1 gutter broom) .............. 117" (2,972 mm)
Sweeping Width (pickup head only) ............. 90" (2,286 mm)
Travel Width ...........................................................96 inches
Height ............................................................... 122.5 inches
Hopper Lifting Capacity ......................................... 10,000 lb.
Minimum GVWR .................................................... 26,000 lb.
Wheelbase ..............................................Chassis-dependent

Chassis:
A selected truck chassis is provided to give adequate ratings of
all components compatible with hopper capacity. Option of cab
over or conventional type. Turning radius and wheelbase
dependent on chassis and hopper size. Consult factory for
detailed requirements.

Hopper:
Volumetric Capacity .............................. 8 cu. yds. (6.11 m3)
Dump Angle ...................................................................... 53°
Floor Angle ......................................................................... 3°
Lifting .............................................. Twin hydraulic cylinders
Hopper Dump Door ................ Open/close/lock hydraulically
Inspection Doors ................. Two on each side of the hopper
Material ................................. 10-gauge steel with 3/16" floor
Safety Prop .................... Dual steel bars located under body

Dry Dust Control System:
Type ............................Patent-Pending vertical top mounted
cartridge filters with reverse flow purge technology
Location ............ Integral to Hopper - No External Chambers
Filters ................................................................................. 30
Filter Media ............................................................. Polyester
Volumetric Capacity ...................... 3.3 cubic yards(2.52 m3 )
Useable Capacity .......................... 1.0 cubic yard (.764 m3 )

Blower System:
Drive ..................... Direct via a 3-groove, banded power belt
Construction ...................................................... Hardox steel
Housing Liner ..................................... Bolt-in corded rubber
Mounting ........................................... 2 regreasable bearings
Vacuum Enhancer ......................... For heavy / light material

Sweeping Head:
Type ........................ Dual chambered, full-width blast orifice
Operating Direction ............................... Forward and reverse
Suspension ................................ Adjustable spring-balanced
Length ........................................................... 90" (2,286 mm)
Pressure Hose Diameter .............................. 14" (355.6 mm)
Suction Hose Diameter ................................ 14" (355.6 mm)
Hose Construction ........................................... 3/8" (9.5 mm)
wire-reinforced molded rubber
Sweeping Head Area ................... 3,240 sq. in. (20,903 cm2)
Controls ........................................ Hydraulic raise and lower
Skids ...................................... Double wide tungsten carbide
Construction .................................... Abrasion-resistant steel
inlet and outlet transitions

Electrical System:
Voltage ........................................................................ 12 volt
Auxiliary-Engine Alternator ................................. 65 amperes
Protection ................................... Re-settable circuit breakers

Water System:
Type ............................................ High Pressure/Low Volume
Tank Capacity ................................... 150 gallons (567 liters)
Construction ...................................................... polyethylene
Pump ......................................................... Electric 12-volt dc
Controls ........................................................................ In-cab
Filter .......................................... 200 mesh screen, cleanable
Fill Diameter .................................................. 2.5" (63.5" mm)
Fill Hose ................... 25 ft. w/ 2.5-inch NST hydrant coupling
Mounting ............................................................... Removable
Low-Water Warning .......................................... Indicator light

Gutter Broom(s):
Type ......................................... 5-segment plastic disposable
Location ................. Right and left, forward of sweeping head
Diameter ........................................................ 44" (1,118 mm)
Drive ......................... Hydraulic torque motor with relief valve
Controls ....................................................................... In-cab
Broom Material ....................................... Vertical steel digger
Mounting .................................................. Trailing arm design
Suspension ......................................... Torque-sensing spring
Wear Adjustment .................................................... Automatic
Speed ................................................ Variable, non-reversing
Impact Protection ......................................................... Spring
Tilt Angle Adjustment ................ Manual or remote (optional)
Fugitive Dust Shrouds .......... Steel with 4” Suction Hose and
adjustable vacuum control for each side

Hydraulic System:
Pump Capacity ................................ 6.5 gpm (29.54 L / min.)
Drive ...................................................................... Direct gear
Maximum Pressure ............................... 2,500 PSI (172 bar.)
Reservoir ................................................................ 25 gallons
Filter ........................................................... 10-micron spin-on
Controls ............................................ In-cab/Electro-hydraulic
Valve Banks ................................ Electrical directional valves
Protection ............................................... Pressure relief valve

Dry Dust Control System:
Type ........................................Quiet high output screw type
Output.......................................................................100 CFM
Location...............................................Front module mounted
Drive.......................................................................Belt driven

Auxiliary Hydraulic System:
Type ................................ Gear type, driven by electric motor
Function .............. Raise / lower hopper, open / close hopper
door, raise brooms and sweeping head.

Paint:
One coat of sealer primer and 2 coats of DuPont Imron 5000®
polyurethane in standard white color.

Optional Equipment:
Dual steering, cab-mounted barlight beacon, arrow board,
washdown system, special lighting, ether cold starting aid, engine
block heater, load weight indicator, automatic lube system, and
others. Consult the factory for a listing of all currently available
options.