General Specifications:
Sweeping Width (2 gutter brooms) ..................... 120 inches
Sweeping Width (1 gutter broom) ......................... 89 inches
Sweeping Width (main broom only) ....................... 58 inches
Travel Width ............................................................ 96 inches
Height .................................................................... 120 inches
Hopper Lifting Capacity .......................................... 10,000 lb.
Minimum GVWR ............................................. 31 to 33,000 lb.
Wheelbase ............................................... chassis dependent
Dirt Hopper:
Capacity ............................................................ 5 cubic yards
Dumping ................. direct transfer (right or left, as ordered)
Material ........................................................... 10-gauge steel
Dump Height .......................................................... 118 inches
Includes safety pins.
Dirt Conveyer::
Type ..................... squeegee with replaceable rubber flights
Material ............................. abrasion-resistant bolt-on bottom
Bearings ............................. sealed self-aligning, anti-friction
Cleaning ............................ built-in conveyer flushing system
Speed .................................... variable forward and reverse
Controls ........................................................ hydraulic in-cab
Chain Material .............................................. dual steel strand
Sprockets .................... replaceable shock-absorbing rubber
Auger scoop ............................................ replaceable bolt-on
Adjustments .............................easy access for chain slack,
............................................. flight wear, and elevator height
Conveyer-to-ground-height .. automatically raises for travel
with broom when backing up.
Main Pickup Broom:
Diameter .................................................................. 36 inches
Length ..................................................................... 58 inches
Material ........................................ replaceable polypropylene
Motor ............................................... Rollervane, Torquemotor
Controls ........................................................ hydraulic in-cab
Dirt Shoes ........................................................ polypropylene
Back-Up .................................................... main broom raises
Dolly-wheel suspension and single-point broom attachment
ensures constant main broom / surface contact.
Electrical System:
Voltage ........................................................................ 12 volt
Auxiliary-Engine Alternator ................................. 65 amperes
Protection .................................... re-settable circuit breakers
Fuel System:
Capacity .................................................................. 50 gallons
Location ............................................. “along truck frame rail”
|
Water System:
Tank Capacity ...................................................... 350 gallons
Construction ...................................................... polyethylene
Pump ............................... Roller powered by hydraulic motor
Controls ........................................................................ in-cab
Filter ............................................................ fine mesh screen
Fill Hose .................. 25 ft. w/ 2.5-inch NST hydrant coupling
Mounting ................................................................ removable
Low-Water Warning ......................... (optional) indicator light
Spray Nozzle ....... 10 across front bumper, 2 at each gutter
............................. broom (and 7 on optional rear spray bar)
Gutter Broom(s):
Type ......................................... 5-segment plastic disposable
Diameter .................................................................. 49 inches
Motor ............................................... Rollervane, Torquemotor
Controls ........................................................ hydraulic in-cab
Broom Material ..................... 26-inch oil-tempered steel wire
Mounting .................................................... trailing arm design
Location ................................................................ behind cab
Suspension ......................................................... free floating
Wear Adjustment ..................................................... automatic
Speed ........................................................................ variable
Impact Protection .......................................................... spring
Tilt Angle Adjustment .................. manual or remote (optional)
Hydraulic System:
Pump Type ....................................... multi-stage tandem gear
Reservoir ................................................................ 37 gallons
Controls ............................................................. cab-mounted
Valve Banks ............................... electrical directional valves
Protection .............................................. pressure relief valve
Filtration ............................. (2) 10-micron spin-on return and
................................................ (2) 100 mesh suction strainer
Paint:
One coat of sealer primer and 2 coats of finish enamel in
specified color.
Chassis:
A selected truck chassis is provided to give adequate ratings
of all components compatible with hopper capacity. Option of
cab over or conventional type. Turning radius and wheelbase
dependent on chassis. Consult factory for detailed requirements.
Optional Equipment:
Dual steering, cab-mounted barlight beacon, arrow board,
washdown system, special lighting, ether cold starting aid,
engine block heater, load weight indicator, automatic lube
system, and others. Consult the factory for available options. |
